红色烟火着色剂MOF[Sr2(DTDA)(H2O)6]n的制备与性能

以富氮羧酸类分子2,2'-(3,3'-偶氮-双(1H-1,2,4-三唑-5基))二乙酸(H2DTDA)与氢氧化锶八水合物为原料,在水热条件下制备了一种金属有机框架(MOF)结构的新型红色烟火着色剂[Sr_2(DTDA)(H_2O)_6]_n(1);采用傅里叶变换红外光谱(FT-IR)、X射线单晶衍射(XRD)、粉末X射线单晶衍射(PXRD)和元素分析等对化合物结构进行了表征;采用热重法(TG)-差示扫描量热法(DSC)、BAM标准法测试了化合物1的热性能和感度性能;设计了烟火剂配方,对化合物1应用于红色烟火着色剂的可行性进行分析。结果表明,化合物1是一种具有二维空间结构的MOF材料,其层状结构之间存在丰富的氢键作用;放大合成的水热实验同样可以得到高纯度的化合物1;撞击感度为80 J,摩擦感度 360 N;化合物1可作为红色着色剂应用于烟火剂配方中。     

水氯镁石制备金属镁的过程集成与能量分析

以无水氯化镁和氧化镁作为中间产物，电解和热还原为两个关键方法，集成各种相关过程，构建了从水氯镁石到金属镁的综合过程网络，其中涉及24个物种、20个化学过程和25个工艺路线；建立了最低能耗分析模型用于简单和复合过程的能量分析；利用物质的标准生成焓和多温等压摩尔热容，计算得出全部反应过程及工艺过程的能量消耗和热量移除。结果表明基于还原法的最优路径是水氯镁石用石灰法转为氢氧化镁，进而煅烧成氧化镁，再铝热还原成金属镁，该过程能耗360.15 kJ/mol，放出热量–315.46 kJ/mol；基于电解法的最优路径是石灰乳法生成氢氧化镁，再煅烧成氧化镁，通过在熔融电解质中电解生成金属镁，该过程能耗738.54 kJ/mol，放出热量–135.42 kJ/mol。无水氯化镁制备耗能高，不在最优路径中。     

臭氧氧化技术在有色金属湿法冶金中的应用研究进展

臭氧是一种氧化性极强、多功能化的绿色氧化剂。本文综述了臭氧氧化技术在有色金属湿法冶金领域的研究进展和应用现状,重点介绍了在贵金属、重金属、稀有金属及轻金属等有色金属湿法冶金领域的应用研究。详细探讨了臭氧的强氧化性对低品位金属矿和难冶金属矿浸出、溶液中低价态金属离子氧化沉淀、溶液净化除杂等方面的作用机理,并对目前面临的问题进行简要叙述,对其在有色金属湿法冶金领域的应用前景进行了展望。     

薄膜铂电阻元件稳定性测试与分析

高端军事应用环境对测温传感器提出了小结构、高精度、良好的长期稳定性等要求,采用溅射方式制备的薄膜铂电阻元件成为了首选。通过分析薄膜铂电阻元件的结构、工艺,探讨影响稳定性的主要因素,包括薄膜缺陷、杂质、电迁移、结构封装应用与温度应力等。选择薄膜铂电阻在水三相点下的电阻值作为稳定性的比较基准,设计了一款不大于3mK的高精度测试系统。通过对薄膜铂电阻元件进行高温电寿命试验和温度冲击试验,评估得出薄膜铂电阻元件长期稳定性达到10mK,满足设计需求。     

Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Effective thermal management of electronic integrated devices with high powder density has become a serious issue, which requires materials with high thermal conductivity (TC). In order to solve the problem of weak bonding between graphite and Cu, a novel Cu/graphite film/Cu sandwich composite (Cu/GF/Cu composite) with ultrahigh TC was fabricated by electro-deposition. The micro-riveting structure was introduced to enhance the bonding strength between graphite film and deposited Cu layers by preparing a rectangular array of micro-holes on the graphite film before electro-deposition. TC and mechanical properties of the composites with different graphite volume fractions and current densities were investigated. The results showed that the TC enhancement generated by the micro-riveting structure for Cu/GF/Cu composites at low graphite content was more effective than that at high graphite content, and the strong texture orientation of deposited Cu resulted in high TC. Under the optimizing preparing condition, the highest in-plane TC reached 824.3 W·m⁻¹·K⁻¹, while the ultimate tensile strength of this composite was about four times higher than that of the graphite film.     

New ways to improve the damping properties in high‐performance thermoplastic vulcanizates

The incorporation of viscoelastic materials represents an effective strategy to reduce the vibratory level of structural components. Thermoplastic vulcanizates (TPVs) are a special type of viscoelastic material that combines the elastomeric properties of rubbers with the easy processing of thermoplastics. In the present work, we propose innovative ways to improve the damping properties of high‐performance TPVs by using rubbers with carboxylic functionalities. For that, TPVs from physical blends of carboxylated hydrogenated acrylonitrile butadiene rubber (XHNBR) and polyamide 6 (PA6) were prepared. The chain dynamics of different mixed crosslink systems containing peroxide, metal oxides and hindered phenolic antioxidants were investigated in order to find the most suitable strategy to design a high‐performance TPV system with upgraded damping properties. The results indicate that the damping performance of the TPV system can be tailored by controlling the type and magnitude of the bonding interactions between the mixed crosslink system and the XHNBR rubber phase. Therefore, this study demonstrates the potential of TPV systems containing carboxylic rubbers as high‐performance damping materials. © 2020 Society of Chemical Industry     

超精密气体静压系统节流器法向随机微振动研究

以无气腔平面节流器为研究对象,对节流器流固耦合法向随机微振动进行了理论仿真和实验研究。受限于节流器厚度与气膜厚度尺寸的差异和输入初始边界条件,建立了节流器的COMSOL仿真简化模型,对节流器-气膜微流场进行双向流固耦合数值模拟。仿真结果表明,节流器的法向随机微振动幅值关于节流器中心对称,且由中心向边缘逐渐增大;微振动幅值随气体入口流速的增大而增大。实验采用纳米级激光测振仪,依次测量供气压力为0.1,0.2,…,0.5 MPa时尺寸为75 mm×50 mm×14 mm的HEXAGON双环联结型节流器多个不同位置的法向振动,实验结果表明,法向随机微振动幅值分布特性与仿真结果一致,关于节流器中心对称,且由中心向边缘逐渐增大,验证了节流器法向微振动的"跷跷板"振动形式;在0.5 MPa供气压力下,边缘振动幅值超过1 nm。对实验数据进行功率谱密度分析,结果表明不同供气压力下法向随机微振动均在9.4 kHz和10.6 kHz处产生较大功率,可认为与节流器-气膜流固耦合系统的固有频率有关。研究结果有效地揭示了节流器法向随机微振动的特性,为气体静压系统避开随机共振区、优化气体静压系统的设计提供了理论指导。     

Inhibition of stress corrosion cracking in 304 stainless steel through titanium ion implantation

The effects of titanium ion implantation on the stress corrosion cracking (SCC) behaviour of 304 austenitic stainless steel were studied. Slow strain rate tests (SSRTs) were conducted on 304 steel in air and in 5?wt-% NaCl solution. The microscopic effects of ion implantation were evaluated by Stopping and Range of Ions in Matter Procedures (SRIM). Fracture morphologies and microstructures were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The fracture surfaces illustrate that ion implantation significantly inhibits the corrosion pits that initiate SCC. A dense passive film, which inhibits SCC, was formed during the ion implantation process. SCC initiation was restrained due to the dense dislocation nets that were generated by titanium ion implantation.

Highlights

• Ion implantation inhibits SCC susceptibility.

• The lack of Cr at the grain boundary leads to the expansion of SCC along the grain boundary.

• Implantation-induced damage leads to high-density dislocations.

• The surface was amorphised due to high-density dislocations.

     

The influence of the waveguide on the quality of measurements with ultrasonic Doppler velocimetry

The article is devoted to the study of the influence of geometric parameters of sound-conducting walls on the quality of measurement of liquid metal flow velocities by ultrasonic Doppler velocimetry. It was shown that the thickness and radius of a sound-conducting wall (waveguide) have a notable effect on the resulting velocity profiles. The flow in a round pipe, the length of which is much larger than its diameter, is considered as a reference flow. The positive effect of a stepwise waveguides with a diameter smaller than the diameter of the piezoelectric element of an ultrasonic transducer on the quality of velocity measurements was verified experimentally. It was found that the accuracy of the resulting velocity profiles largely depends on the length and the material of the waveguides, as well as the velocity of the incoming flow of liquid metal.     

内蒙古呼伦贝尔早中生代花岗岩的年代学和岩石地球化学研究：对岩石成因和地球动力学机制的制约

微细粒钛铁矿的回收制约着我国攀西地区钛资源的高效开发利用。四川某矿业公司的斜板溢流原矿属辉石、橄榄石混合型钛铁矿，且粒度极细，-19 μm产率为79.22％，其中TiO2分布率为87.54％。研究结果表明，预先采用强磁选可有效消除部分超微细粒钛辉石、橄榄石等易浮杂质对浮选分离的不利影响，磁选精矿通过一次粗选五次精选一次精扫选流程，可获得钛精矿产率为21.85％，TiO2品位为47.44％，回收率为62.89％的良好指标，为矿山高效利用钛资源提供了合理的技术方案。